|
Easy to install.
Mounting hardware included.
Solid heavy duty construction.
Adjustable tilt and roll (15 degrees).
Adjustable height 8 - 17
Three adjustable rotating arms (360 degrees)
Weight Capacity: 10 kg
|
A heavy duty ceiling mount
bracket enabling 30° of adjustment both horizontally
and vertically. Mounting holes can be up to 460mm apart.
Height from the ceiling may be varied between 500 and 800mm
in 100mm steps. Extendible brackets are included for mounting
to a majority of projector models currently on the market.
|
Steel construction.
Four fully adjustable and extendable swing arms to accomodate
various mounting patterns.
Removeable extention arm with variable height adjustment
120mm & 430mm to 650mm.
15degree tilt, pitch and yawl adjustment.
Glossy white painted finish.
Mounting hardware included.
Maximum load weight 20kg
|
|
Designed to suit a majority
of projector models on the market today. This all steel
ball mount bracket allows up to 30 degrees of adjustment
either vertically or horizontally which is more than enough
for most installations! The projector mounting surface sits
˜115mm from the ceiling and may be removed from the
upper bracket for adjusting the projector settings if required.
Two sets of mounting arms are provided (140mm & 180mm)
and may be adjusted on the base plate as desired.
|
Designed to suit a majority
of projector models on the market today. This all steel
ball mount bracket allows up to 30 degrees of adjustment
either vertically or horizontally which is more than enough
for most installations! The projector mounting surface sits
˜115mm from the ceiling and may be removed from the
upper bracket for adjusting the projector settings if required.
Two sets of mounting arms are provided (140mm & 180mm)
and may be adjusted on the base plate as desired.
|
Designed to suit a majority
of projector models on the market today. This all steel
ball mount bracket allows up to 30 degrees of adjustment
either vertically or horizontally which is more than enough
for most installations! The projector mounting surface sits
˜115mm from the ceiling and may be removed from the
upper bracket for adjusting the projector settings if required.
Two sets of mounting arms are provided (140mm & 180mm)
and may be adjusted on the base plate as desired.
|
