Ezymount VLM 5400 TV Wall Mount Bracket
Handles up to a 90″ TV and a Weight Capacity 65kg. The EZYMOUNT VLM 5400 TV WALL MOUNT BRACKET is Ideal for today’s larger TVs.
The Ezymount TV bracket can swivels up to 120° and Tilts -5° to +15°. Tilting your television set can help if your TV is susceptible to light reflection from a nearby window or desk lamp. Fully adjustable so you can angle your television to suit your viewing position. Made of steel the EZYMOUNT VLM 5400 TV Wall Mount Bracket is super strong, no need to worry about it bending or twisting as some of the weaker TV bracket are susceptible of doing.
The mounting wall plate will span 600mm or 450mm studs for secure installation, you should have no problem getting a solid fixing onto a wooden or metal stud, given the span of the mounting plate. Ensure the perfect installation with your TV always level with the helpful -3° to +3° level adjustment.
Good design and simple instructions combine to makes the EZYMOUNT VLM 5400 TV Wall Mount Bracket, a breeze for wall mounting your television.
All necessary screws and hardware are included.
Two vertical mounting rails, fully assembled EZYMOUNT VLM 5400 TV Wall Mount Bracket hardware and assembly instructions.
Swivels up to 120°
Tilt range -5° to +15°
Extends from wall up to 635mm
Wall plate suits 600mm and 450mm wall studs
Level adjust ±3°
Weight Capacity 65kg
Screen Size 42-90″ (106-228cm)
Tilt Range: -5° to +15° max (Tilt range can be affected by larger screen sizes)
Mounting screw hole pattern VESA: 200mm x 200mm, 300mm x 300mm, 400mm x 200mm, 400mm x 400mm, 600mm x 400mm compliant
Distance of TV from wall 69mm to 635mm
For extra reach extension, check-out The EZMOUNT VLM7800 TV Mounting Bracket. Ezymount VLM-7800. Extra Long Arm Full Motion TV Wall Mount.
Screen Sizes: 43 to 80″ (109 to 203cm) Weight: Up to 65kg.
VESA: Up to 800 x 400mm
INSTALLERS TIP: Because this TV bracket extends quite a distance from the wall, when extended, it’s a good idea to use extra long power and AV Cables, so as not to restrict the movement of the bracket and also prevent damage to your expensive TV.
Don’t use cable ties or electrical tape too close together around the cables, or fasten too tightly, let the cables have a bit of give. This will help your wall bracket and TV stay in the position you require and allow you to move your TV in and out more smoothly.
Secondly, this TV bracket needs to have at least three good fixing into a timber or metal stud if fixing to a plasterboard wall. Obviously four or more solid fixing into studs would be better, but this may not be able to be done in all situations. In situations where we can’t get other fixings into studs we use Ramset Hollow Wall Anchors which can hold about 14Kg each.
The upshot is DON’T fix this TV wall bracket to a plasterboard wall without at least three solid fixing into a timber or metal stud. If fixing to a brick, stone or concrete wall use the wall plugs provided with the bracket, or Ramset Universal Anchors, Red or Blue.
Don’t install your TV too high on the wall, first sit on a chair or lounge and check the best height for viewing your TV. We like to position the TV bracket no higher the 1400mm off the floor in most domestic situations, With regard to commercial installations the height that we install the TV varies greatly.
Note: If your TV, regardless of its screen size, weighs less than the weight capacity stated here, and the location of its mounting screw holes correspond with those listed, then this mount is suitable for your TV. Ezymount Brackets are distributed by Canohm Pty Ltd.