VOGELS TVM 3245 TV MOUNTING BRACKET
With the VOGELS TVM 3245 TV MOUNTING BRACKET you can enjoy your TV from all angles.
Thanks to One-Finger™ Movement, you can rotate the screen to the ideal position with just one finger.
Special bearings ensure that the wall mount turns extremely smoothly and easily.
- Smooth OneFinger™ Movement
- Keep your TV always level (horizontally and vertically)
- Cable clips included: Guide your cables from TV to wall
- Effortless tilting – Avoid reflections and tilt up to -10° up to 10°
- Turn your TV up to 180° thanks to long arms of 49 cm
- Stylish and safe: full-motion TV wall mount for TVs from 19 to 43 inc
With this stylish COMFORT Full-Motion+ TV wall mount, you are choosing safety, design and optimal viewing comfort. The wall mount is very robust and can withstand intensive use. Because the wall mount can rotate up to 180°, you can enjoy your TV from any angle in the room. Tilting is possible up to an angle of 20° (10° forwards and backwards). The VOGELS TVM 3245 TV MOUNTING BRACKET is suitable for TVs from 19 to 43 inches and weighing up to 15 kg.
Enjoy your TV from every angle
With One-Finger™ Movement, you can rotate the screen to the ideal position with just one finger. Special bearings ensure that the wall mount turns extremely smoothly and easily.
Ease of installation
Installing your Vogels TVM 3245 TV Mounting Bracket is easy. Vogel’s also gives you a helping hand. A drilling template, screws, Fischer® DuoPower plugs, cable ties and spirit level are included in the packaging. Marking out the first drill hole is easy with our free DrillRight™ AR App and all installation instructions are concisely described in the Quick Installation Guide. The detailed manual and installation video are available online.
COMFORT Full-Motion+ TV wall mounts meet the highest safety requirements. They have been successfully tested to three times their maximum weight capacity and therefore carry the TÜV certificate. COMFORT Full-Motion+ TV wall mounts come with a 10-year guarantee.
Available in Black or White.
INSTALLATION TIPS: Because this TV bracket can extends quite a distance from the wall. It’s a good idea to use extra long power and AV Cables, so as not to restrict the movement of the bracket, and also prevent damage to your expensive TV.
Try not to use cable ties or electrical tape too close together around the cables, or fasten too tightly, let the cables have a bit of give. This will help your motion bracket and TV stay in the position you require, allowing you to move your TV in and out more smoothly.
Secondly, this TV bracket needs to have at least four good fixing into timber or metal studs. If fixing to a plasterboard wall, obviously more solid fixing into studs would be better, but this may not be the case in all situations. In situations where you can’t get other fixings into studs try using Ramset Hollow Wall Anchors which can hold about 14Kg each, for a bit more strength.
DO NOT use wall mates or other fixing into the plasterboard only! YOU MUST HAVE SOME FIXINGS INTO THE WALL STUDS.
The upshot is DON’T fix this TV wall bracket to a plasterboard wall without at least THREE solid fixing into a timber or metal stud. If fixing to a brick, stone or concrete wall use the wall plugs provided with the bracket, or Ramset Universal Anchors, Red or Blue.
Don’t install your TV too high on the wall. First sit on a chair or lounge and check the best height for viewing your TV. We like to position the TV bracket no higher the 1400mm off the floor in most domestic situations. With regard to commercial installations the height that we install the TV varies greatly.
Note: If your TV, regardless of its screen size, weighs less than the weight capacity stated here, and the location of its mounting screw holes correspond with those listed, then this mount is suitable for your TV. Distributed by Canohm Pty Ltd.