Vogels TVM 3225 TV Wall Mount Bracket


Vogels TVM 3225 TV Wall Mount Bracket



The VOGELS TVM 3225 TV WALL MOUNT BRACKET is design for Safety and viewing comfort go hand in hand with this stylish COMFORT Full-Motion TV wall mount.

The wall mount is specially designed for intensive use. It is very sturdy and guarantees an optimal viewing experience. You can turn the wall mount up to 120° and tilt it 20° (10° forwards and backwards). The VOGELS TVM 3225 TV WALL MOUNT BRACKET is suitable for TVs from 19 to 43 inches and weighing up to 15 kg.

  • OneFinger™ Movement
  • keeps your TV always level (horizontally and vertically)
  • cable clip included: Guide your cables from TV to wall
  • effortless tilting – Avoid reflections and tilt up to -10° up to 10°
  • smoothly turn your TV up to 120°
  • stylish and safe: full-motion TV wall mount for TVs from 19 to 43 inches

Optimal enjoyment of your TV
You want to enjoy your TV to the max. The COMFORT Full-Motion TV wall mount makes this possible. You can set the ideal viewing angle with just one finger, as the wall mount features One-Finger™ Movement. The secret is in the special bearings. This makes turning your TV very smooth and easy.

Easy installation
Your VOGELS TVM 3225 TV WALL MOUNT BRACKET is easy to install. Vogel’s makes things easy for you in every way. A drilling template, screws, Fischer® DuoPower plugs, cable tie and spirit level are included in the packaging. To mark out the first drill hole, use our free DrillRight™ AR App. Quick installation instructions can be found in the Quick Installation Guide. A detailed manual and installation video are available online.

TÜV certified
COMFORT Full-Motion TV wall mounts are TÜV certified. This means, among other things, that they have been successfully tested to three times their maximum weight capacity. As a result, they meet the highest safety requirements. COMFORT Full-Motion TV wall mounts come with a 10-year guarantee.

INSTALLATION TIPS: Because this TV bracket can extends quite a distance from the wall. It’s a good idea to use extra long power and AV Cables, so as not to restrict the movement of the bracket, and also prevent damage to your expensive TV.

Try not to use cable ties or electrical tape too close together around the cables, or fasten too tightly, let the cables have a bit of give. This will help your motion bracket and TV stay in the position you require, allowing you to move your TV in and out more smoothly.

Secondly, this TV bracket needs to have at least four good fixing into timber or metal studs. If fixing to a plasterboard wall, obviously more solid fixing into studs would be better, but this may not be the case in all situations. In situations where you can’t get other fixings into studs try using Ramset Hollow Wall Anchors which can hold about 14Kg each, for a bit more strength.

DO NOT use wall mates or other fixing into the plasterboard only! YOU MUST HAVE SOME FIXINGS INTO THE WALL STUDS.

The upshot is DON’T fix this TV wall bracket to a plasterboard wall without at least THREE solid fixing into a timber or metal stud. If fixing to a brick, stone or concrete wall use the wall plugs provided with the bracket, or Ramset Universal Anchors, Red or Blue.

Don’t install your TV too high on the wall. First sit on a chair or lounge and check the best height for viewing your TV. We like to position the TV bracket no higher the 1400mm off the floor in most domestic situations. With regard to commercial installations the height that we install the TV varies greatly.

Note: If your TV, regardless of its screen size, weighs less than the weight capacity stated here, and the location of its mounting screw holes correspond with those listed, then this mount is suitable for your TV. Distributed by Canohm Pty Ltd.